CHARACTERISTICS
Test Signal Generator
- Sampling Frequency
Luminance Channel: 13.5 MHz
Color Difference Channels: 6.75 MHz
- Digital Coding: 10-bit or 8-Bit linear PCM in all channels
Parallel Digital Interface
- Output Format: Balanced ECL (10K series); 10 data pairs, 1 clock pair, system
ground, chassis ground
- Interface Clock: 27.0 MHz
Serial Digital Video Interface (Opt 1S)
- Digital Format: CCIR 601 Component; 525/60 or 625/50; 8-bit or 10-bit Data;
Scrambled NRZI
- Bit Rate: 270 Mb/s
- Outputs: Number of Connector: 4/BNC
Embedded Audio
- Number of Channels: 4
- Frequency: 1 kHz, 800 Hz or silence
Clock Outputs
- Luminance Channel: 13.5 MHz
- Color Difference Channels: 6.75 MHz
- Connector: BNC
Sync Generator
- Line and Field Rates: 525/60 or 625/50 (user selectable)
- Black Burst - 2 Outputs: NTSC in 525/60 mode PAL in 625/50 mode
|
|
Digital Component Generator
Features
- Conforms to ITU-R BT. 601/656, EBU Tech 3267, and SMPTE 125M, 259M, and RP165
- 10- or 8-Bit Signal Generation
- Parallel Digital Video Test Signal Outputs
- Four Serial Digital Video Outputs (Opt. 1S)
- Separate Y, B-Y, R-Y Clock Outputs
- 525/60 and 625/50 Operation
- NTSC or PAL Black Burst Outputs
- Sync Lock to 525/60 or 625/50
Applications
- D1 VTR and Other 4:2:2 Component Digital Equipment Testing and Maintenance
Test Signal Generator
- SMPTE color bars
- Color bars (100% and 75%)
- Pluge
- 5-step
- Ramp
- Limit ramp
- Valid ramp
- Modulated ramp
- Light blue shallow ramp
- Shallow ramp
- Shallow ramp matrix
- Pulse and bar
- Field square wave
- Co-siting verification
- Multipulse
- Multiburst
- Full and reduced amplitude sweeps
- Bowtie timing
- 50% flat field
- Convergence pattern
- Digital/analog blanking markers
- Digital gray
- Super black
- APL: high, low and bounce
|
