(Shown with a 9010 Plug-In Programmable Oscillator) |
|
AC Power Supply
The Elgar 2253M has been designed to provide three-phase output AC power at adjustable amplitudes and precise frequencies for use in test purposes, motor operation, and frequency conversion applications. The output amplitude of the AC Power Source is adjustable from 0.0 to 130 VAC line-to-neutral at an output frequency range of 45 Hz to 5 kHZ.
Specifications
| Output Power Per Phase |
650 VA |
| Load Power Factor |
Unity to ±0.7 |
| Output Voltage |
0 - 130 VRMS L-N |
| Output Configuration |
4 wire isoltated from ground any one phase or neutral may be grounded |
| Output Frequency Range |
45 Hz to 5 kHz |
| Output Distortion (full load) |
Less than 0.9% |
| Load Regulation |
Less than 1% L-N |
| Hum and Noise |
Less than 70 dB full load |
| Input Power |
3 phase, 208 VAC L-L, 47 - 63 Hz, 5.5 kVA maximum input power |
| Output Voltage |
0 - 130 VAC RMS L-N |
| Five Output Voltages |
Output 1: |
3 Phase, 650 VA, 130 VRMS, 45 -5 kHz |
| Output 2: |
1 Phase, 52 VA, 26 VRMS, 400 Hz |
| Output 3: |
1 Phase, 13 VA, 26 VRMS, 400 Hz |
| Output 4: |
1 Phase, 13 VA, 26 VRMS, 400 Hz |
| Output 5: |
1 Phase, 130 VA, 130 VRMS, 400 Hz |
| Input |
Voltage and Phase: |
208 VAC L-L, 3 phase, 47 - 63 Hz |
| Maximum Volt-Amperes: |
5.5 kVA |
| Weight |
300 lbs |
|
