Probes
| CT-10 Clamp-on CT |
| Rated |
1-10 Amps AC |
| Frequency response |
45 Hz - 3 kHz |
| Jaw Opening |
0.47" |
| CT-150 Clamp-on CT |
| Rated |
0.25-150 Amps AC |
| Frequency response |
45 Hz to 3 kHz |
| Jaw Opening |
0.47" |
| CT-300 Clamp-on CT |
| Rated |
10-300 Amps AC |
| Frequency response |
45 Hz to 3 kHz
at stated accuracy
|
| Jaw Opening |
2.00" |
| CT-1000 Clamp-on CT |
| Rated |
50-1000 Amps AC |
| Frequency response |
30 Hz to 3 kHz
at stated accuracy |
| Jaw Opening |
2.17" |
| CT-3000 Clamp-on CT |
| Rated |
100-3000 Amps AC |
| Frequency response |
48 Hz to 3 kHz |
| Jaw Opening |
2.56", bus bar 1.97" X 5.31" max |
|
|
Portable Power Analyzer
Features
- Channels: 8 - 4 Voltage and 4 Current
- Scope and Meter Modes
- Measure Power Quality, Harmonics, Energy, InRush, and Flicker
- Measure V,I,W, VA,VAR,PF, Demand & Energy (TASKCard 8000)
- Cycle-by-Cycle Disturbance Capture (TASKCard PQPlus)
- Two Hour UPS
- Menu Driven Operation
- RS-232 Serial Interface
- Waveform (TASKCard PQPlus) and Simultaneous Channel Capture
- Classifies Power Quality Disturbances to IEEE 1159 (TASKCard PQPlus) and Voltage Flicker in Accordance with IEC-868 (TASKCard Flicker)
- Time Plot Any Monitored Parameter
- Integral PC Memory Card Interface
Specifications
| Voltage Range |
10 - 600 Vrms on 4 channels |
| Voltage Transients |
50 - 6000 Vpk (requires TASKCard PQPlus) |
| Current Range |
10 - 200% of full-scale current probe rating (below) |
| Current Transients |
10 - 300% CT full scale except channel D which is 2 - 200% CT full scale (requires TASKCard PQPlus) |
| Frequency Range (fundamental) |
30 - 450 Hz |
| Update Rates |
Once per second (Harmonic based-perameters updated every 5 seconds) |
| Battery Life |
2 hours |
|
