 |
|
Single-Phase AC Power Source
Specifications
| Power Output |
1,667 VA at 35°C |
| Output Phase |
1 |
| Output Frequency |
17 Hz to 5 kHz |
| AC Noise Level |
200 mV typical |
| Line Input |
115 V or 230 V single phase |
| Line Frequency |
47 Hz to 440 Hz |
| Output Current |
12.34A at 135V |
| Power Factor |
0 to 1.0 |
| Peak Repetitive Current |
5.0 times max current at 50°C |
| Voltage Range |
135/270 volts STD |
| 67.5/135 volts LV option |
| 156/312 volts HV option |
| 200/400 volts EHV option |
Optional Controllers:
- -P: Programmable Controller, the standard programmablecontroller, uses True RMS sensing, pro-viding the most accurate output volt-age regulation. Output settling times forthe -P controller are longer than the-PT controller due to the RMS senseresponse time. With Type -P, transientsare programmable over time or cycles.
- Voltage Range: 0-135V / 0-270 V L-N
- Frequency Range: 45 Hz - 5 kHz
- -PT: Fast Transient Controller, uses a fast real-time servo,instantly creating exact waveform defi-nitions ideal for applications such asswitching DC power supplies wherereal-time feedback and fast output set-tling times are critical. The -PT control-ler is recommended for applications
- Voltage Range: 0-135V / 0-270 V L-N
- Frequency Range: 45 Hz - 550Hz
- -M: Manual Control Oscillator, the manual controller, isideal for portable or benchtop applica-tions where local control is sufficient.An optional remote programmable volt-age input can be added to allow ampli-tude control using a DC input signal.
- Voltage Range: Variable pot control
- Frequency Range: 45 Hz - 5 kHz
|
